 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| DATA SHEET SKY13274-349LF: PHEMT SP2T Switch 0.5-6.0 GHz Features Positive low voltage control (0/+3 V) G Low insertion loss (0.8 dB typ. @ 6 GHz) G High Rx isolation (28 dB @ 6 GHz) G Tx port termination G Miniature QFN-8 pin plastic package (2 x 2 mm) G PHEMT process G Lead (Pb)-free and RoHS-compliant G Functional Block Diagram ANT Rx Tx Description The SKY13274-349LF is a PHEMT AlGaAs single-pole, doublethrow switch designed for use as a transmit receive (TR) switch for ultra-wideband (UWB) transceivers. This switch offers excellent insertion loss and isolation over wide bandwidth. It features a terminated transmit input port, which is provided via an external termination resistor for added versatility. The receiver output port is reflective. The switch is controlled with single-polarity control voltage of 3 V and 0 V, and is also compatible with control voltage as high as 7 V. This switch is packaged in the surface mount QFN-8 package, which is lead (Pb)-free and meets all current RoHS requirements. RF GND (paddle) V2 V1 RF Term NEW Skyworks offers lead (Pb)-free, RoHS (Restriction of Hazardous Substances)-compliant packaging. Skyworks Solutions, Inc. * Phone [781] 376-3000 * Fax [781] 376-3100 * sales@skyworksinc.com * www.skyworksinc.com 200306 Rev. B * Skyworks Proprietary Information * Products and Product Information are Subject to Change Without Notice. * May 30, 2007 1 DATA SHEET * SKY13274-349LF Electrical Specifications at 25 C Z0 = 50 , VCTL = 0/3 V, unless otherwise noted Parameter Insertion loss Isolation Condition Tx-Ant, Rx-Ant Tx-Ant Rx-Ant Return loss Tx-Ant, Rx-Ant (insertion loss) Tx-Ant (isolation) Rx-Ant (isolation) Frequency 0.5-3.0 GHz 3.0-6.0 GHz 0.5-3.0 GHz 3.0-6.0 GHz 0.5-3.0 GHz 3.0-6.0 GHz 0.5-3.0 GHz 3.0-6.0 GHz 0.5-3.0 GHz 3.0-6.0 GHz 0.5-6.0 GHz 22 14 27 23 Min. Typ. 0.5 0.8 25 17 30 26 20 15 20 15 Reflective Max. 0.7 1.0 Unit dB dB dB dB dB dB dB dB dB dB dB Operating Characteristics at 25 C Z0 = 50 , VCTL = 0/3 V, unless otherwise noted Parameter Switching characteristics Rise Fall On Off Input power for -0.1 dB compression Input Intermodulation intercept point (IIP3) Control voltages Control Port Current Condition 10/90% RF 90/10% RF 50% CTL to 90% RF 50% CTL to 10% RF VCTL = 0/3 V 2-tone, f = 5 MHz, VCTL = 0/3 V Low (VLOW) High (VHIGH) VCTL = 3 V VCTL = 0 V 0.5-3 GHz 900 MHz 0 2.7 Frequency Min. Typ. 100 10 100 20 25 45 0.2 7.0 50 20 Max. Unit ns ns ns ns dBm dBm V V A A Skyworks Solutions, Inc. * Phone [781] 376-3000 * Fax [781] 376-3100 * sales@skyworksinc.com * www.skyworksinc.com 2 May 30, 2007 * Skyworks Proprietary Information * Products and Product Information are Subject to Change Without Notice. * 200306 Rev. B DATA SHEET * SKY13274-349LF Typical Performance Data Z0 = 50 , VCTL = 0/3 V, unless otherwise noted 0 -0.2 -0.4 -40 C 25 C -10 85 C 0 -5 Insertion Loss (dB) -0.8 -1.0 -1.2 -1.4 -1.6 -1.8 -2.0 0 1 2 Isolation (dB) -0.6 -15 -20 -25 Rx -40 C -30 Tx 25 C -35 Rx 25 C 3 4 5 6 Rx 85 C Tx 85 C Tx -40 C 3 4 5 6 0 1 2 Frequency (GHz) Frequency (GHz) Insertion Loss vs. Frequency 0 -5 0 -5 Isolation vs. Frequency Return Loss (dB) -15 -20 -25 Tx -40 C -30 Tx 25 C -35 0 1 2 3 Tx -40 C Return Loss (dB) -10 -10 -15 -20 -25 -30 -35 Tx 25 C Tx 85 C Tx -40 C Tx 85 C Tx -40 C Tx 25 C Tx 25 C Tx 85 C Tx 85 C 4 5 6 0 1 2 3 4 5 6 Frequency (GHz) Frequency (GHz) Return Loss Tx Isolation State vs. Frequency Return Loss Tx Ins. Loss State vs. Frequency 0 Rx -40 C -5 Rx 85 C Rx 25 C 0 -5 Return Loss (dB) Return Loss (dB) -10 Rx 25 C -15 -20 -25 Rx 85 C -30 -35 0 1 2 3 4 5 6 Rx -40 C -10 -15 -20 -25 -30 -35 0 1 2 3 Rx -40 C Rx 85 C Rx 25 C Rx 25 C Rx -40 C Rx 85 C 4 5 6 Frequency (GHz) Frequency (GHz) Return Loss Rx Isolation State vs. Frequency Return Loss Rx Ins. Loss State vs. Frequency Skyworks Solutions, Inc. * Phone [781] 376-3000 * Fax [781] 376-3100 * sales@skyworksinc.com * www.skyworksinc.com 200306 Rev. B * Skyworks Proprietary Information * Products and Product Information are Subject to Change Without Notice. * May 30, 2007 3 DATA SHEET * SKY13274-349LF Absolute Maximum Ratings Characteristic RF input power Control voltage Operating temperature Storage temperature JC Value 1 W > 500 MHz 0/+7 V control -0.2 V, +7 V -40 C to +85 C -65 C to +150 C 45 C/W Pin Out (Top VIew) V1 1 8 CBL Rx GND 2 CBL 3 7 GND CBL ANT 6 Tx V2 4 5 Performance is guaranteed only under the conditions listed in the specifications table and is not guaranteed under the full range(s) described by the Absolute Maximum specifications. Exceeding any of the absolute maximum/minimum specifications may result in permanent damage to the device and will void the warranty. R1 Termination CAUTION: Although this device is designed to be as robust as possible, Electrostatic Discharge (ESD) can damage this device. This device must be protected at all times from ESD. Static charges may easily produce potentials of several kilovolts on the human body or equipment, which can discharge without detection. Industry-standard ESD precautions must be employed at all times. CBL = 39 pF for operation >500 MHz. R1 = 39 . Exposed paddle on bottom of package needs to be connected to ground. Pin Descriptions Pin Number 1 Pin Name V1 Description Control voltage 1 - Control Voltage Input #1. The logic level voltage applied to this pin, along with the level voltage applied to pin 4, determines the states of the RF paths between the Tx, Rx and Ant ports. Equipotential point - Internal circuit common which must be connected to the pcb ground or common via the lowest possible impedance. RF input/output. Control voltage 2 - Control Voltage Input #2. The logic level voltage applied to this pin, along with the level voltage applied to pin 1, determines the states of the RF paths between the Tx, Rx and Ant ports. An external termination resistor must be added to this pin for the Tx port to be matched when Tx-Ant path is in its isolation state. RF input/output. Equipotential point - Internal circuit common which must be connected to the pcb ground or common via the lowest possible impedance. RF input/output. 2 GND Applications The SKY13274-349LF is designed for use as an UWB TR switch for signal frequencies up to 6 GHz. When the switch is in its receive state with the voltage at pin 1 (V1) low and the voltage at pin 4 (V2) high, the Tx input port is terminated via an external resistor connected between pin 5 (R1) and ground. A 39 external resistor in this position produces a 50 (nominal) impedance looking into pin 6. DC blocking capacitors are required at each of the RF ports. The nominal value for these capacitors is 39 pF This value should be increased for operation with RF at frequencies below 500 MHz. The exposed paddle on the back side of the package must be grounded for proper operation. 8 Rx 3 4 Ant V2 5 Termination 6 7 Tx GND Truth Table V1 Low High Low High V2 High Low Low High Rx-Ant Ins. Loss Isolation Tx-Ant Isolation Ins. Loss Recommended Solder Reflow Profiles Refer to the "Recommended Solder Reflow Profile" Application Note. Not recommended(1) Not recommended(1) Low = 0-0.2 V. High = 3 V. 1. Switch is in an undefined state. Tape and Reel Information Refer to the "Discrete Devices and IC Switch/Attenuators Tape and Reel Package Orientation" Application Note. Skyworks Solutions, Inc. * Phone [781] 376-3000 * Fax [781] 376-3100 * sales@skyworksinc.com * www.skyworksinc.com 4 May 30, 2007 * Skyworks Proprietary Information * Products and Product Information are Subject to Change Without Notice. * 200306 Rev. B DATA SHEET * SKY13274-349LF Suggested Land Pattern 0.56 0.28 8X 0.60 TR Switch ANT DC Block ANT 9X Exposed Solder Area 0.50 Pitch 0.51 1.02 0.25 Rx Output DC Rx Block Tx DC Block Tx Input 8X 0.21 8X 0.66 RF GND (paddle) V2 V1 RF Term R1 QFN-8 0.70 0.05 0.125 Max. 10 + 2 -10 0.20 0.05 Tx Term R1 L 2.00 BSC C 1 0.125 Max. C L Pin 1 Mark 0.025 0.025 0.90 0.10 Side View 0.56 0.01 2.00 BSC Top View 0.28 0.01 0.29+0.16 -0.09 0.20 + 0.08 -0.02 0.29 + 0.16 -0.09 R 0.075 Ref C L 1.02 + 0.10 -0.08 0.51 0.01 0.50 BSC 1 Exposed Pad 0.17/0.30 2X Bottom View All dimensions are in mm. Skyworks Solutions, Inc. * Phone [781] 376-3000 * Fax [781] 376-3100 * sales@skyworksinc.com * www.skyworksinc.com 200306 Rev. B * Skyworks Proprietary Information * Products and Product Information are Subject to Change Without Notice. * May 30, 2007 5 DATA SHEET * SKY13274-349LF Copyright (c) 2002, 2003, 2004, 2005, 2006, Skyworks Solutions, Inc. All Rights Reserved. Information in this document is provided in connection with Skyworks Solutions, Inc. ("Skyworks") products or services. These materials, including the information contained herein, are provided by Skyworks as a service to its customers and may be used for informational purposes only by the customer. Skyworks assumes no responsibility for errors or omissions in these materials or the information contained herein. Skyworks may change its documentation, products, services, specifications or product descriptions at any time, without notice. Skyworks makes no commitment to update the materials or information and shall have no responsibility whatsoever for conflicts, incompatibilities, or other difficulties arising from any future changes. No license, whether express, implied, by estoppel or otherwise, is granted to any intellectual property rights by this document. Skyworks assumes no liability for any materials, products or information provided hereunder, including the sale, distribution, reproduction or use of Skyworks products, information or materials, except as may be provided in Skyworks Terms and Conditions of Sale. THE MATERIALS, PRODUCTS AND INFORMATION ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, INCLUDING FITNESS FOR A PARTICULAR PURPOSE OR USE, MERCHANTABILITY, PERFORMANCE, QUALITY OR NON-INFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT; ALL SUCH WARRANTIES ARE HEREBY EXPRESSLY DISCLAIMED. SKYWORKS DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. SKYWORKS SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING BUT NOT LIMITED TO ANY SPECIAL, INDIRECT, INCIDENTAL, STATUTORY, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS THAT MAY RESULT FROM THE USE OF THE MATERIALS OR INFORMATION, WHETHER OR NOT THE RECIPIENT OF MATERIALS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Skyworks products are not intended for use in medical, lifesaving or life-sustaining applications, or other equipment in which the failure of the Skyworks products could lead to personal injury, death, physical or environmental damage. Skyworks customers using or selling Skyworks products for use in such applications do so at their own risk and agree to fully indemnify Skyworks for any damages resulting from such improper use or sale. Customers are responsible for their products and applications using Skyworks products, which may deviate from published specifications as a result of design defects, errors, or operation of products outside of published parameters or design specifications. Customers should include design and operating safeguards to minimize these and other risks. Skyworks assumes no liability for applications assistance, customer product design, or damage to any equipment resulting from the use of Skyworks products outside of stated published specifications or parameters. Skyworks, the Skyworks symbol, and "Breakthrough Simplicity" are trademarks or registered trademarks of Skyworks Solutions, Inc., in the United States and other countries. Third-party brands and names are for identification purposes only, and are the property of their respective owners. Additional information, including relevant terms and conditions, posted at www.skyworksinc.com, are incorporated by reference. Skyworks Solutions, Inc. * Phone [781] 376-3000 * Fax [781] 376-3100 * sales@skyworksinc.com * www.skyworksinc.com 6 May 30, 2007 * Skyworks Proprietary Information * Products and Product Information are Subject to Change Without Notice. * 200306 Rev. B |
Price & Availability of SKY13274-349LF
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |